INSTALLATION
STEP 1
STEP 2
STEP 3
35mm
Mixer Tap
DRILL 35MM HOLE FOR DUAL FAUCET
• You will need to drill a 35mm diameter hole in
the bench top or sink where you would like to
place the dual faucet.
• The dual faucet must be within 600mm of the
proposed location of the WFA Duo under bench
boiling tank, and filter system (if included).
Dual Faucet
INSTALLING THE DUAL FAUCET
• Insert all tubing through the 35mm hole
as illustrated, and lower the faucet into
position.
• Take care not to damage or kink the tubing
as it passes through the 35mm hole.
• Do not pull on the tubing.
INSTALLING THE DUAL FAUCET
• Secure the dual faucet into position as
shown in diagram.
Chrome-plated
Metal Flange
Mounting
Hole 35mm
O-Ring
Rubber
Washer
Metal
Washer
Locking Nut
Dual Faucet
Important Notice of Routine
Maintenance and Care
• Do not keep rotating the spout
• Occasional cleaning of the aerator
is recommended. Use of soapy
water and a soft sponge or cloth is
recommended.
• Avoid cleaning with chemicals,
solvents or harsh detergents (this
may seriously harm surface area)
• If used with hard water or water
with very high mineral content, it is
absolutely necessary to clean and
dry faucet immediately after every
use. (Calcium and other minerals
could seriously damage surface
area).