POWER SUPPLY
• A standard 10amp 3pin power outlet conveniently placed within 1m of the intended location of the
boiler tank. This must be installed by a qualified electrician.
WATER SUPPLY
• A standard cold water supply fitted with a 15mm stop tap situated within easy access of the intended
location of the boiler tank. This must be installed by a qualified plumber and in accordance with local
& state laws.
• A 350 kPa pressure limiting valve is supplied and must be installed.
• Water supply must be microbiologically safe.
INSTALLATION PRE-REQUIREMENTS
TYPICAL INSTALLATION
• Allow a minimum air space
of 100mm around the
front, sides, and top of the
boiler tank. No clearance is
required at the back of the
boiler tank.
• The boiler tank must be
situated within 600mm of
the dual faucet.
INSTALLATION DIAGRAM
Power supply
Dual Faucet
Boiling Tank
Filtered
Water to
boiling tank
(white tube)
Filtered
Hot water
to dual faucet
(clear tube)
Filtered Cold water
to dual faucet (blue tube)
Mixer Tap
Stop tap
for cold
water
supply
(not
included)
Pressure
Limiting
Valve
1
/
2
” fbsp
push lock fitting
¼” mbsp x ¼”
tube connector
Pressure Limiting
Dual Check
Valve 350kPa
