background image

The unit must only be used for a potable water 

source and with cold water (with a temperature 

range between 2 and 38°C).
Water Filters Australia Pty Ltd (WFA) warrants 

to you, the first person who has purchased and 

used the unit (“you”) that this unit is free from 

defects due to faulty material and workmanship 

in accordance with the conditions set out in this 

document.This warranty is provided to you in 

addition to your rights at law, including but not 

limited to your rights under the Trade Practices 

Act 1074 (Cth) and applicable legislation in your 

Australian State or Territory.

WHAT THIS WARRANTY COVERS:

This warranty covers defects due to faulty 

material and workmanship of the unit supplied 

to you:
•   For a period of 1 year from the date of 

purchase in respect of the entire unit, 

excluding the Replaceable Elements.The 

Replaceable Elements are consumable 

components and all parts of the unit which 

can be replaced including but not limited 

to the filter or water treatment cartridge if 

there is a defect in the filter or cartridge.This 

does not include the replacement of the filter 

or cartridge to extend the life of the filter or 

cartridge. The life of the filter cartridge is 

affected by water quality, usage and water 

pressure.The warranty only extends to the 

original purchaser of the unit.

WHAT THIS WARRANTY DOES NOT COVER:

This warranty does not cover the unit or a 

Replaceable Element of the unit where:
•   The defect, fault or failure is attributable, or 

substantially attributable to misuse, abuse, 

accident, misapplication, neglect, freezing, 

oxidizing agents (including but not limited to 

chlorine, ozone, chloramines and other related 

components) or act of God;

•   The unit has been in conditions which do 

not conform to the recommended design 

guidelines or has been operated in a manner 

which is contrary to WFA’s printed instructions;

•   The unit has not been installed in accordance 

with WFA’s printed instructions and has 

not been installed in compliance with all 

applicable laws, regulations and industry 

standards;

•   The unit has not been used in accordance with 

the manufacturer’s instructions;

•   The unit does not meet the conditions for 

use described in the Owners Manual or 

Performance Data Sheet for this unit

•   You use accessories or components which do 

not meet WFA’s specifications as set out in the 

Owners Manual;

•   The defect, fault or failure is due to normal 

wear and tear; 

•   The defect, fault or failure has occurred where 

the unit has been used reasonably or has 

reached its serviceable life;

•   The serial or model number label of the unit is  

removed or defaced;

•   The unit is serviced, modified, altered or 

repaired by an unauthorized or unqualified 

person. 

HOW TO MAKE A CLAIM UNDER THIS 

WARRANTY: 

To make a claim under this warranty you must 

contact WFA within 21days of the defect, fault 

or failure occurring. WFA Warranty Contact 

number is 1300 785 355. At the time of repair or 

replacement under your warranty claim you must 

provide to WFA:
•    Proof that you purchased the unit from 

an authorized retailer or dealer within the 

warranty time; and

•   A copy of a certificate which certifies that 

the unit was installed in compliance with 

our printed installation instructions and all 

applicable laws, regulations and industry 

standards. WFA will only pay for repair or 

replacement upon receipt of proof of your 

purchase showing the date of purchase. 

WARRANTY

Summary of Contents for K-WFADUOGN

















Reviews: