Water Depot ECONO Series, Owner'S Manual

Page: 17 / 17

automatically when c. Broken drive gear or drive cap
assembly c. Replace drive gear or drive cap
assembly
UP and DOWN buttons d. Defective PC board d. Replace PC board
are depressed and held
7. Control valve does not a. Defective PC board a. Replace PC board
regenerate b. Set-up error b. Check control valve set-up procedure
automatically but does
when UP and DOWN
buttons are depressed
8. Smell and/or Iron
bleeding thru a. Size of equipment correct
b. Check media
a. Chlorinate hot tank
9. Smell Hot side only b. Optional to remove anode rod.
c. If condition persists check for sulphur
reducing bacteria
a. Unit backwashed thoroughly at install.
(backwash now)
10. Black or Grey water
(cold side) b. Check backwash control
c. Plugged backwash control
d. Kinked drain line
12. Excessive noise
during backwash a. Fasten all lines
13. Particles in water
(Media-Black) a. Broken distributor or riser tube.
17