WatchOvers WG13 Quick Setup Manual Download

Page: 21 / 21

Quick Set up Guide WG13 Alarm & Keypad 29 03 2022 V1

Pairing your SOS Emergency Button Wristband

Installation

Ensure the Alarm Base Station is plugged in and turned on:

STEP 1

. From the App on your phone, on Alarm home screen tap Accessories > +, then the

base station goes into the pairing/sniffer mode with all indicators blinking.

STEP 2.

Trigger the SOS Emergency Button that you wish to add to send a transmission

signal to the base station before its 20 second sniffer countdown expires, once paired the base
station emits a sound.

To trigger the Panic Button for pairing – Power on the button by simply pressing the SOS
button, a light will come on the device.

STEP 3.

Name the device and rename the Zone Mode – Click on the accessory and you will

see the option to rename. Remember to Save when finished.

Summary of Contents for WG13






















Search results

Summary of Contents for WG13

Reviews:

Related manuals for WG13

Brands by name

Popular brands

WatchOvers WG13, Quick Setup Manual

Search results

Summary of Contents for WG13

Reviews:

Related manuals for WG13

Brands by name

Popular brands