Quick Set up Guide WG13 Alarm & Keypad 29 03 2022 V1
Specifications
Power Supply:
Micro USB+5VDC/1000mA
Backup Battery:
3.7V, 300mAh Lithium-ion Battery
Consumption:
<150mA@normal
GSM:
850/900/1800/1900MHz
Wi-Fi:
IEEE802.11b/g/n
Radio Frequency:
433Mhz
Connectivity:
wireless siren and up to 100 wireless sensors
Operating Temperature:
-10~55
℃
9.
Pairing Additional Sensors
Ensure the Base Station is plugged in and turned on.
It is best practice is to pair the sensors close to the base station and to test them in their
intended location before fixing each sensor to its permanent location.
Door/Window Alarm Sensor
Pairing your Door / Window Alarm Sensor
Ensure the Base Station is plugged in and turned on.
STEP 1
. At your device home screen in the App tap Accessories > +, then the base station
goes into the pairing/sniffer mode with all indicators blinking.
STEP 2.
Trigger the wireless Door/Window alarm sensor that you wish to add to send a
transmission signal to the base station before its 20 second sniffer countdown expires, once
paired the base station emits a sound.
STEP 3.
Name your device, set the type and mode of your device. Please see above
instructions under Name/Type/Mode of each sensor.
To trigger a Door/Window alarm sensor for pairing - Start with the sensor and magnet closely
aligned, then separate them until the blue light comes on.
