Users Manual WG13 Alarm & Keypad 04 04 2022
User and Admin Passcode
The keypad has two 4-digit passcodes. The user passcode is used to arm, home arm
and disarm your security system, the admin passcode can be used to pair, delete RFID
tags and change passcodes. The default user passcode is “
1234
” and the admin
passcode is “
8888
”.
Programming
Basic programming steps
STEP 1.
Enter
admin passcode
then press
√
, the setting indicator light on means that
programming mode is ready.
STEP 2.
Input the appropriate number to select functions:
1
Pair RFID Tag
2
Delete RFID Tag
3
Delete All RFID Tags
0
Set User Passcode
9
Set Admin Passcode
then press
√
, and the setting indicator blinks.
STEP 3.
Enter setting then press
√
, the buzzer beeps twice.
LAST STEP.
Press
←
then
√
to exit programming.
Pairing an RFID Tag
The RFID tags supplied with the system are paired with the keypad. If they are unpaired
or you want to pair more tags, you can pair the tag with your keypad as following.
STEP 1.
Enter the admin passcode then press
√
.
STEP 2.
Press 1 then
√
.
STEP 3.
Enter a digit from 0 to 9 to designate a unique number for the tag
to be paired, then
√
, the arming, disarming and setting indicators blink
together.
STEP 4.
Tap the tag on the read zone, the keypad will beep twice to
confirm pairing successful.
Note:
up to 10 RFID tags can be added. Two tags cannot have the same number.
Deleting an RFID Tag
STEP 1.
Enter the admin passcode then press
√
.
STEP 2.
Press 2 then press
√
.
STEP 3.
Enter the tag number from 0 to 9 to be deleted, then press
√
.
Deleting All RFID Tags
STEP 1.
Enter the admin passcode then press
√
.
STEP 2.
Press 3 then press
√
to delete all RFID tags.
Setting User Passcode
STEP 1.
Enter the admin passcode then press
√
.
STEP 2.
Press 0 then press
√
.
STEP 3.
Enter the new 4-digit user passcode, then press √.
Setting Admin Passcode
STEP 1.
Enter the admin passcode then press
√
.
STEP 2.
Press 9 then press
√
.
STEP 3.
Enter the new 4-digit admin passcode, then press
√
.
