Users Manual WG13 Alarm & Keypad 04 04 2022
Keypad & RFID Tags
The wireless touch keypad Arms and Disarms your security system with a
passcode or RFID tag. It is connected to your alarm base station with an effective
communication range of up to 80 meters without obstacles. The internal lithium-ion
rechargeable battery provides power for up to 3 months allowing you to place the
keypad anywhere within range.
The RFID tag removes the need to remember the alarm code, this is very useful
for children or temporary users such as carers or tradesmen and can be attached
to a keyring. You will receive an App alert when a RFID tag is used to either arm
or disarm the alarm, letting you know they have arrived home or left home.
Charging the Battery
Push the battery On/Off switch to the On position.
Connect your keypad to a power outlet using the included cable and USB power adapter.
It takes two to three hours to charge the keypad battery fully from no power. The power
indicator changing from breathing green to solid green means that the battery is fully
charged.
If the keypad battery is low, the power indicator will flash red once every 2 seconds,
indicating that it needs to be charged.
About the Keypad
Sleep/Wake mode
To save the battery, the keypad goes into sleep mode within 20 seconds of non-use.
Touch any button to wake the keypad.
