Users Manual WG13 Alarm & Keypad 04 04 2022
HOME Zone. Sensors that have been given the zone as Home, will not arm when you chose
HOME Arm and will not activate if triggered in the usual way.
•
Tap
Disarm
- to disarm the alarm
And
Disarm
your system to disarm all sensors and freely walk in and out of your home. The
sensors that have the zone set as 24 Hours or 24 Hours silent Zone, will activate if triggered
even when you have chosen the disarm option.
•
Tap
Panic
- to trigger an emergency alarm.
The
Panic mode
will trigger the alarm so that the siren will sound. A notification will be sent
via the app to your contacts that are listed in the app. An SMS will be sent to your SMS
contacts in the app and a phone call will be made to alert the person you have listed to receive
an alarm call.
You can also arm and disarm the alarm using the keypad and/or RFID Tags – for
instructions please see below at Keypad & RFID Tags
Settings Explained
•
Exit delay –
Your security system has been programmed with delay times that allow
you to exit your home after arming. If you leave home too late when exiting, it will
cause a false alarm. If a false alarm occurs, you should disarm the system immediately.
Tap on Exit delay to change the amount of delay time you have to leave your home;
choose how many seconds you wish to delay the alarm setting and remember to
confirm so that the new setting is saved.
