Top-level configuration mode commands
WatchGuard Command Line Interface Guide
49
interface command
WG#config<ENTER>
WG(config)#interface
Effect
Enters the system interface configuration mode, at
which point you can enter interface-specific
commands and their arguments.
Arguments
None in this mode.
See Also
See “Level 2 interface configuration commands” on
page 82 for details on specific “interface” mode
commands.
ipsec command
WG#config<ENTER>
WG(config)#ipsec
Effect
Enters the IPSec configuration mode, at which
point you can enter IPSec action- and proposal-
specific commands and their arguments.
Arguments
None in this mode.
See Also
For more information about “IPSec” mode
commands, see “Level 2 IPSec configuration
commands” on page 95.
license command
WG#config<ENTER>
WG(config)#license