CHAPTER 3: Configuration Mode Commands
94
WatchGuard Vclass 5.1
Arguments
<a.b.c.d>
This argument records the IP address assigned to
this interface.
</prefix|mask>
This argument records the number of bits in the
subnet mask, or the subnet mask.
Example
WG(config-if)#ha2 10.0.0.1
255.255.255.0<ENTER>
or
WG(config-if)#ha2 10.0.0.1/24<ENTER>
mode command
WG(config-if)# mode router |
transparent<ENTER>
Effect
Use to switch the appliance between Router mode
and Transparent mode.
An appliance can only be switched from Router
mode (default) to Transparent mode when the
appliance is in the factory default configuration
state. You are prompted to restore the system to the
factory default state when you attempt this switch.
An appliance can be switched from Transparent
mode to Router mode in any configuration
condition.
A restart is required in order to for mode switching
take effect.
Arguments
None
Example
WG(config-if)# mode router<ENTER>
