Second level configuration mode commands
WatchGuard Command Line Interface Guide
109
Effect
Enables this appliance to be managed by means of
the WatchGuard Centralized Policy Manager
(CPM). You can also use this command to disable
CPM as needed. If enabling CPM access, be sure to
enter the CPM-access password immediately
following the “enable” argument.
Arguments
enable
Enter this argument to activate WatchGuard CPM
access to this WatchGuard appliance.
<password_text>
Enter the text of the CPM access password after
“enable”.
disable
Enter this argument if you have already
established CPM access and want to disable the
connection.
Example
WG(config)#cpm enable
cpm_admit_1<ENTER>
fwuser command (configure system level)
WG#config<ENTER>
WG(config)#system <ENTER>
WG(config-sys)#fwuser -t<idle_timeout>
[seconds|minutes]
Effect
Allows you to change the value for a firewall user
connection idle timeout. The system default is two
hours, and the default increment is "seconds".
Argument
-t <idle_timeout> [seconds|minutes]