Second level configuration mode commands
WatchGuard Command Line Interface Guide
101
Examples
WG(config-qos)#action high_QoS -
bandwidth 25<ENTER>
WG(config-qos)#action mid_QoS -
bandwidth 5<ENTER>
Enable or disable port shaping for interface 0 or 1
WG#config<ENTER>
WG(config)#qos <ENTER>
WG(config-qos)#system [<interface
0|interface 1> \
<<num>Kbps|Mbps>] [enable|disable]
Effect
Enables (or disables) port shaping for either the
interface 0 (private) or interface 1 (public) of a
WatchGuard appliance, and enters the general QoS
value for that interface. The value entered will be
the sending throughput of that interface. To enable
a system port-shaping action, the appliance will
automatically restart in order to apply the policy.
Arguments
<interface 0 | interface 1>
Use this argument to enter one of these interfaces.
<<num>Kbps|Mbps>
Use this argument to enter one option – Kbps or
Mbps – plus the appropriate number value.
<enable | disable>
Use this argument to enter one of these options.
Example
WG(config-qos)#system interface 1 10Mbps
enable<ENTER>
# This example shows a policy that restricts output-
throughput of the Public interface to 10 megabits per
second.