CHAPTER 1: Using the Command Line Interface
20
WatchGuard Vclass 5.1
To assign network addresses to appliance
interfaces
To assign network addresses to the data interfaces, use
these commands (along with the arguments and values
noted later in this user guide):
To complete system configuration
To complete the initial system configuration, use these
commands:
Command
Additional Information
WG(config-if)#interface 0
WG(config-if)#interface 1
WG(config-if)#interface 2
if a DMZ interface is present
WG(config-if)#ha2
if an HA2 port is present
Command
Description
WG(admin)#passwd
change the default password to a new,
secure password
WG(config-sys)#route
includes both static and dynamic
routes
WG(config-sys)#dns
connect to a domain name server
WG(config-sys)#snmp
connect to any SNMP management
stations
WG(config-sys)#log
activate needed system activity
logging
WG(config-sys)#ldap
connect this appliance to an LDAP
server
WG(config)#tunnel_switch
activate WatchGuard tunnelswitching
features
