Watchguard DV-1 guide, User Manual

Page: 33 / 142

DV-1 CONFIGURATION SETUP INPUT DEVICES
33
The CONFIGURE GPS screen is displayed.
Press the
YES
or
NO
keys to choose whether you want GPS speed
displayed on-screen.
Press
OK
to confirm, or
Cancel
to exit without making changes.
CAUTION!
The temperature sensor was calibrated at the factory during
manufacturing. Temperature sensor calibration
may be
necessary; however, it should only be performed when
instructed by Customer Service personnel.
U.S. customers, call 1-800-605-6734 or email
customerservice@watchguardvideo.com prior to selecting this
option. International customers, contact your local distributor.
The objective of the calibration process is to match a temperature for
the sensor when the system’s internal temperature would be the
same as a known external temperature. This calibration is best
performed when the system is cool (i.e., no sun exposure). Some
DV-1 units calibrate automatically, and therefore, this option is not
available on those systems.
Press
MENU
>
SYSTEM SETTINGS
>
Setup Input Devices
(Radar, Siren, etc.)
>
Calibration and Units
.