Watchguard DV-1 guide, User Manual

Page: 32 / 142

SETUP INPUT DEVICES DV-1 CONFIGURATION
32
The SETUP BRAKES, LIGHTS, AND SIREN screen is displayed.
Press the
Up

&
Down

keys to select the input setting.
Press
YES
or
NO
for each setting you wish to change.
YES
sets the input to be monitored.
NO
sets the input to NOT be
monitored.
Press
OK
to confirm, or
Cancel
to exit without making changes.
If your system has been equipped with the optional GPS receiver,
there will be a GPS antenna connector on the back of the system,
and you will have the ability to set the GPS to begin monitoring the
receiver. A GPS antenna is shown on the right.
In order for the GPS system to track satellites and provide data to the
DV-1, the GPS antenna needs to be installed where it has a clear
view of the sky.
Press
MENU
>
SYSTEM SETTINGS
>
Setup Input Devices
(Radar, Siren, etc.)
>
GPS
.
The SETUP GPS screen is displayed.
Press the
Up

&
Down

keys to select the
INTERNAL NMEA
3.0 GPS
or whichever model is installed. Press the
Configure
key.