Instruction Manual for MODEL A9
□
11-0
□,
A9
□
12-0
□
8/8
9.Error Messages
Error Display
Description
Recovery Procedure
(O.L.)
(-O.L.)
An input or displayed value is
out of the measurement
range
Use the panelmeter within the specified measurement and display ranges.
(WAIT)
Waiting for a displayed
data’s becoming valid
After power-on, this message is displayed while a displayed data is not
available until first setting sampling time.
Check if Averaging times (AVG) is not set too many.
(DAT)
Internal memory error
Turn the power on again. If the panelmeter doe’s not recover, contact your
sales representative or our sales office directly.
* Display of 10
0
digit varys according to error details.
(C.O.N.D.)
Condition data error
Set condition data again.
* Modify 1 or more paremeters in the data and cycle through all of other
parameters.
(N.E.T. .)
Scaling data error
Set scaling data again.
* Modify 1 or more paremeters in the data and cycle through all of other
parameters.
(L.I.N.E.)
Linearize data error
Set linearize data again.
* Modify 1 or more paremeters in the data and cycle through all of other
parameters.
(S.H.F.T.)
Shift data error
Set linearize data again.
(D. .Z. .)
Digital zero back up error
Write the Digital Zero value.
10. Timing Chart
AVG
setting
Setting sampling
rate
Setting sampling
period
AVG
setting
Setting sampling
rate
Setting sampling
period
1
25 times/sec
40ms
20
1.25 times/sec
800ms
2
12.5 times/sec
80ms
40
0.625 times/sec
1.6s
4
6.25 times/sec
160ms
80
0.3125 times/sec
3.2s
8
3.125 times/sec
320ms
100
0.25 times/sec
4s
10
2.5 times/sec
400ms
200
0.125 times/sec
8s
11.
Warranty and After-Sales Service
11.1
Warranty
The warranty lasts for one year from the date of delivery. If this
product fails during this period and the reason is considered to be
clearly.
The manufacturer warrants to the original retail customer its A9000
series digital panelmeter to be free of defects in material and
workmanship for use under normal care and will repair or replace any
11.2
After Sales Service
Under strict quality control measures, this product was manufactured,
tested, inspected and shipped. Should a defect in manufacture or
Workmanship be identified, please return the product to our distributor
or directly to us. It would be highly appreciated if you could give a
detailed account of the fault and enclose it with the product.
meter at no charge to the customer during the one (1) year warranty
period of the meter.
Internal sampling
Setting sampling
HOLD input
PC output
（BCD valid）
40ms
20ms
*1
*1
*1）Setting sampling period
(UX-34071j)
WATANABE ELECTRIC INDUSTRY CO., LTD.
6-16-19, Jingumae, Shibuya-ku, Tokyo 150-0001, Japan
Phone: (81)3-3400-6140
Homepage http://en.watanabe-electric.co.jp/
ASAHI KEIKI DIVISION
WATANABE ELECTRIC INDUSTRY CO., LTD.
6-16-19, Jingumae, Shibuya-ku, Tokyo 150-0001, Japan
Phone: (81)3-3400-6141
Homepage http://www.watanabe-electric.co.jp/en/
