Wascomat EXSM 230 S, Operating & Maintenance Manual

Page: 69 / 124

69
Service program
Error codes
Given below is a brief summary of all the error codes and their causes.
Error Code Cause
11 Detergent signal 1, liquid detergent.
12 Detergent compartment 2, cold water /Detergent signal
2, liquid detergent.
13 Detergent compartment 3, cold water /Detergent signal
3, liquid detergent.
14 Detergent compartment 2, hot water /Detergent signal
4, liquid detergent.
15 Detergent signal 5, liquid detergent.
16 Hot water in drum.
17 Detergent compartment 1, cold water.
18 Hard water in drum.
19 Heat: display shows actual temperature in drum, not
code 19. When ”START” is pressed, the heating relay
reacts if the water level is above 64 scale units. (Safety
level).
21 Drain valve/pump
23 Activate door lock. When it is deactivated, the water
drain valve will also open.
24 Level check. The parameter corresponding to the
actual level will be shown on the display, not code 24.
When ”START” is pressed, filling with cold water
commences via detergent compartment 1.
25 Motor, wash speed low (30 rpm), counterclockwise.
26 Motor, wash speed low (30 rpm), clockwise.
27 Motor, wash speed high (48 rpm), counterclockwise.
28 Motor, wash speed high (48 rpm), clockwise.
29 Distribution speed (90 rpm), clockwise.
31 Extraction, low (550 rpm), clockwise.
32 Extraction, medium (700 rpm), clockwise.
33 Extraction, high (1000 rpm), clockwise.
34 Extraction, high (1000 rpm), clockwise.
35 Display, test of segments, LED test, and buzzer.
36 Buzzer