![background image](http://html1.mh-extra.com/html/warner-electric/pb-500-pin-drive/pb-500-pin-drive_installation-instructions-manual_3438508009.webp)
Warner Electric • 800-825-9050
P-0204-WE • 819-0485
9
Figure 4
Step 1
Place straight springs over armature bosses on back
side of armature . (Figure 5)
Step 2
Place armature hub over straight springs .
Straight springs must fit into
the grooves in armature hub. (Figure 6)
Figure 5
Figure 6
The assembly procedure for the autogap accessory is as
follows:
Step 3
Compress conical spring against retainer ring by sliding
detent spring towards head of pin . (All 4 pins) (Figure 7)
Step 4
Insert assembled drive pins through armature hub,
through the straight springs, and into the threaded
armature bosses . Apply grade “AA” Loctite Sealant on
drive pin threads . (Figure 8)
Figure 7
Figure 8
Send Quote Requests to [email protected]
Call +1(800)985-6929 To Order or Order Online At Warnerelectricparts.com
Send Quote Requests to [email protected]
Call +1(800)985-6929 To Order or Order Online At Warnerelectricparts.com