©2012 Warn Industries, Inc.WARN® and the WARN logo are trademarks of Warn Industries Inc.
10 88783A3
M A I N T E N A N C E / C A R E
Before each use:
• Inspect all metal parts on the plow, plow mount, and related hardware. Replace all parts that appear rusted or deformed
prior to use.
• Inspect all nuts and bolts on the plow, plow mount, and related hardware prior to each use. Tighten all nuts and bolts that
appear to be loose. Stripped, fractured, or bent bolts or nuts need to be replaced immediately.
• Check all cables. Replace cables that are worn or frayed.
• Check all moving and rotating parts. Remove debris that may inhibit the part from moving freely. Store out of the weather
between use to protect against corrosion, freezing and to keep operating smoothly.
S E R V I C E
Should you encounter a problem during installation or operation of your Pro-Pivot, please follow these steps toward resolving the prob-
lem:
1. Refer to these installation instructions for illustrations and detailed information on the installation, safe and proper operation,
replacement parts lists and assembly diagrams of your Pro-Pivot. If you are unable to resolve the problem, then go to step 2.
2. Contact your dealer where you purchased your Pro-Pivot. If, after discussing the problem with their parts and service staff, you
are still unable to resolve the problem then go to step 3.
3. Call an authorized WARN Service center from the list provided on the back of the warranty sheet included with the product. When
calling, please have the following information available: Pro-Pivot model number and purchase date, make, model and year of
ATV.
4. If you are unable to resolve the problem to your satisfaction, please call Warn Industries Customer Service at: 1-800-543-9276.
When calling, please have the following information available: Pro-Pivot model number and purchase date, make, model and year
of ATV. You may also contact Warn Industries by visiting our website: www.warn.com.
W A R R A N T Y
Please refer to the warranty sheet enclosed with your Pro-Pivot for details.
• Slow Operation:
- low battery - charge or replace battery
- bent or damaged component causing friction - remove Pro-Pivot assembly and inspect swivel base of push tube
assembly for damage.
- bad electrical connections - inspect all electrical connections. Connections must be tight and free of corrosion.
- wrong bolts used to secure pivot to tubes. Use supplied.
•
Erratic/inconsistent function
- bad electrical connections - inspect all electrical connections. Connections must be tight and free of corrosion.
- damaged internal latch components - contact WARN customer service.
