©2012 Warn Industries, Inc.WARN® and the WARN logo are trademarks of Warn Industries Inc.
4
88783A3
I N S T A L L A T I O N I N S T R U C T I O N S
INSTALLATION PREPARATION (disassembly)
NOTE: Use this section if retro fitting an existing plow with the
Pro-Pivot. If you are assembling the plow for the first
time with the Pro-Pivot skip to INSTALLATION (Pro-Pivot
Assembly)
NOTE: It is possible to install Pro-Pivot without removing plow
blade from swivel assembly, however; installation
of Pro-Pivot assembly will be easier if plow blade is
removed.
1. Remove the two plow springs by removing the nuts and
carriage bolts. See Figure 1.
2. Remove the blade from the tube base by unscrewing the
two bolts. See Figure 2.
3. Remove shoulder screw to remove the plow lever as shown
in Figure 3.
Figure 1
Figure 3
Figure 2
