WARN INDUSTRIES
PAGE 7
77085A1
©2007 Warn Industries, Inc.
WARN® and the WARN logo are trademarks of Warn Industries Inc.
Read the vehicle’s operator manual, winch
operator manual and all warning labels prior
to operation of UTV.
WARNING
V. INSTALLATION (continued)
10.
See Figure 11for view of bumper with hood in
raised position.
The bumper installation is now complete. Pro-
ceed to section titled “Optional Winch and Light
Installation”.
VI. Optional Winch and Light Installa-
tion (Refer to these tips if winch and /or
lights are added to bumper)
1.
WARN winch mounting holes are shown in Figure
12. (For RT/XT 25 and 30, use inside set of
holes. For RT/XT 40 winches, use outside set of
holes). Pull yellow cable through front hole and
blue cable through rear hole after sliding conduit
over top both cables. 1/4” ID conduit is to be
used for RT/XT 25 winches; 3/8” ID conduit is to
be used for RT/XT 30 and 40 winches.
2.
If no winch is mounted on bumper the set of
holes, as shown in Figure 12, can be used to
mount a set of lights on top of bumper. If winch is
used, there are holes on bottom of bumper, as
shown in Figure 13, that can be used to mount a
set of lights.
PROCEED TO SECTION TITLED “MAIN-
TENANCE/CARE”.
Figure 10
Figure 11
Figure 12
Light mount
holes
Hole for blue
cable
RT/XT 40 winch
mount holes
RT/XT 25 and 30
winch mount holes
Hole for yellow
cable
