background image

27

warmhaus.com

Ventilation

Do not leave windows slightly open for ventilating room/rooms. In such 
cases, continuous heat loss will occur. Fully opening windows for a short 
period provides a better results should you require room ventilation. Bring 
thermostatic radiator valves to lowest position when ventilating rooms.  
 

Cleaning And Maintenance

Attention: to preserve the boiler's integrity and keep the safety features, 
performance and reliability, which distinguish it, unchanged over time, 
you must at least execute maintenance operations on a yearly basis in 
compliance with what is stated in the relative point at “annual check and 
maintenance of the appliance”, in compliance with national, regional, or 
local standards in force. 

We recommend stipulating a yearly cleaning and maintenance contract 
with an authorized local firm. 

4.3. ISSUES REQUIRED TO BE TAKEN INTO 

CONSIDERATION FOR WARRANTY CONDITIONS

This warranty given by Warmhaus does not cover elimination of failures 
arising from abnormal use of the product and also out of the warranty 
scope for below given situations: 

1.  Damages and failures occurring in devices which are not first started by 

Warmhaus Authorized Services,

2.  Damages and failures arising from use of the product contrary to 

advice given in User Manual and using out of it’s intended purpose.

3.  Damages and failures arising from wrong type selection,
4.  Damages and failures arising from maintenance and repairs performed 

by persons other than our Authorized Services,

5.  Damages and failures occurring due to transportation, unloading, 

loading, storing, external physical (Crushing, scratches, fractures) and 
chemical factors following delivery of the product,

6.  Damages and failures arising from fire and lightning,
7.  Damages and failures arising from false fuel use and fuel characteristics
8.  Low or excessive voltage; unearthed socket usage;
9.  damages and failures arising from faulty electricity installations
10.  Damages and failures arising from failing to perform timely annual 

maintenance

11.  Damage arising from external cleaning
12.  Damages and failures those may occur in the device or usage area due 

to other products and accessories used in a system with the device 
subject to the Warranty,

13.  Damages and failures arising from frost/ice  occurring due to using in 

the outdoor places (open balcony, etc.).

14.  Altering the Registry Label and Warranty Certificate,
15.  Damages and failures arising from using water out of the water values 

defined in device user guide, 

Elimination of above mentioned failures shall be performed against 
payment. 

Dear Warmhaus Customer, 
we believe the importance of providing good products to you as well as 
rendering good services. 

Recommendations and Data to be Followed: 

1.  When first start of your combi is done, please keep the technical service 

document given by the Authorized Service and a copy of device invoice 
and the Warranty Document approved by your Authorized Dealer. 

2. Use your product according to principles of installation and operation 

guide. 

3. Keep the "SERVICE DOCUMENT" if received from your service technician 

following the service taken. The Service Document will be beneficial for 
you in any problems those may occur in your device in the future.

Summary of Contents for LAWA 18

































Reviews: