waratah HTH622B SIII, Operator'S Manual

Page: 3 / 66

Page
Grease Point Location: Rotator . . . . . . . . . . . . . . . . . . . . . 3-1-4
Grease Point Location: Tilt Cylinder . . . . . . . . . . . . . . . 3-1-4
Grease Point Location: Tilt Frame Main Pin . . . . . . 3-1-4
Grease Point Location: Top Saw Unit . . . . . . . . . . . . . 3-1-4
Grease Point Location: Upper Delimb Arms . . . . . . 3-1-5
Grease Point Location: Feed Arms . . . . . . . . . . . . . . . . 3-1-6
Grease Point Location: Length-measuring
Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1-7
Grease Point Location: Feed Unit . . . . . . . . . . . . . . . . . . 3-1-7
Grease Point Location: Main Saw Unit (3/4"
Saw) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1-7
Grease Point Location: Main Saw Unit
(SuperCut 100) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1-8
Maintenance: Schedule
Periodic Maintenance Record . . . . . . . . . . . . . . . . . . . . . . 3-2-1
Maintenance: Every 8 Hours or Daily . . . . . . . . . . . . . 3-2-2
Maintenance: Every 50 Hours or Weekly . . . . . . . . . 3-2-2
Maintenance: Every 200–250 Hours or
Monthly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2-4
Maintenance: Every 1000 Hours or 6 Months . . . . 3-2-6
Maintenance: Every 2000 Hours or Annually . . . . . 3-2-7
Maintenance: General
Recommended Harvester Head Positions for
Saw Chain and Saw Bar Maintenance . . . . . . . . . 3-3-1
Fault-Finding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3-1
Unified Inch Bolt and Cap Screw Torque
Values . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3-2
Metric Bolt and Cap Screw Torque Values . . . . . . . . 3-3-3
Additional Metric Cap Screw Torque Values . . . . . . 3-3-4
Miscellaneous: Carrier
Welding on the carrier or harvester head . . . . . . . . . 4-1-1
Using booster batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1-1
Miscellaneous—Measurements
Metric and Imperial Unit Expressions . . . . . . . . . . . . . . 4-2-1
Miscellaneous: Specification Conversion
Conversion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3-1
Miscellaneous: Wood Measurement
Wood Measurement Equivalents . . . . . . . . . . . . . . . . . . . 4-4-1
Contents
ii