waratah HTH622B SIII, Operator'S Manual

Page: 26 / 66

Beware of Chain shot
XJ1133300—UN—04AUG14
If a saw chain breaks, chain links can fly off the saw at
high speed, causing a hazard. Keep the chain shot
guard in place. Make sure no one stands in the cutting
plane of the saw chain, to about 15 degrees either side,
front and back.
Inspect the Chain shot guard daily or when saw chain
maintenance is performed. The Chain shot guard, cap
screws, and hardware should be replaced annually or
when excessively worn or damaged. Use only approved
replacement parts from the saw manufacturer.
Four different cab warning labels are available:
1.USA/ Canada (F674265)
2.Canada (F674662)
3.USA (F676992)
4.Rest of the world (F673745)
Recommended positions for the cab labels are shown in
the harvester head Parts Catalogue.
T7M7G6M,00004F9-19-02AUG21
Precautions: Processing on the Landing
WARNING
XJ1197279—19—10JUL15
This label is positioned next to any openable forward-
facing window. It warns of potential hazards. These
include chain shot (where chain links can fly off at high
speed) and blind spots behind the carrier.
T7M7G6M,00004FA-19-30JUL21
Safety: Safety Signs and Labels
1-5-4