34
308.708.8185 | [email protected] | Rev. 08/21
• Proper maintenance will ensure longevity and optimum performance of your W&A equipment.
• Visual inspection is recommended before each use. Check for loose bolts, worn parts, cracked welds
and other damage. Replace and repair as needed.
• In addition to a visual inspection before each use, carefully inspect hydraulic components every
100 hours for leaks, excessive wear, swelling and damage. Leaks should be corrected by tightening
the fittings according to the
Hydraulic Fitting Torque Chart
or replacing components. Replace
any components showing signs of excessive wear, swelling or damage.
• Always replace bolts with the same grade, refer to
Bolt Torque Chart
for grade identification. Tighten
bolts according to
Bolt Torque Chart
.
• Always replace parts with W&A parts only.
• We recommend greasing each grease zerk on the toolbar hinge weekly. Grease all attachment
grease zerks weekly, or according to specified lubrication schedule.
• Before long-term storage (3 months or more) clean debris from equipment and touch-up paint to
prevent corrosion.
• Store in a flat dry place away from human activity and livestock.
• After long-term storage (3 months or more) visually inspect equipment and carefully inspect all
components. Especially parts more easily affected by weather damage, such as hydraulic hoses and
wiring. Repair and replace as needed before use.
MAINTENANCE
MAINTENANCE & LUBE
