22
308.708.8185 | [email protected] | Rev. 08/21
1. Hitch to tractor (
.
2. Move to level ground. Be aware of vertical clearance needed to fold implement.
3. Put tractor in Park with parking brake engaged.
4. Clear all persons from on or near the implement.
5. Use the tractor 3-point hitch to raise the implement slightly (so that all tooling is off the ground).
6. Slowly move fold circuit lever(s) to retract cylinders. Observe the folding operation.
7. Slowly move fold circuit lever(s) to extend cylinders. Observe the unfolding operation.
8. Wait for both wings to reach the fully folded position. Set tractor remote(s) to Neutral to hold at folded or unfolded.
FOLDING & UNFOLDING - FOLDING TOOLBAR
DANGER
TIP OVER/CRUSHING HAZARD AND EQUIPMENT DAMAGE RISK:
Never unhitch a folded implement. A folded implement could topple backward or forward,
causing serious injury or death and certain severe equipment damage. When unhitched, the
implement is supported at the rear only by row unit tools and spring tension. Slopes, soft soils,
and soils later softened by rain are particularly dangerous.
ELECTRICAL SHOCK/ELECTROCUTION HIGH-CLEARANCE DANGER:
•
Keep clear of overhead power lines, maintain 20-foot minimum distance. Electrical shock and/
or electrocution can occur; will result in death or serious injury.
•
Hazards may include, but are not limited to, high clearance equipment, low clearance power
lines, lack of awareness of surroundings, etc.
CRUSH HAZARD - WARNING:
•
Keep clear of moving and shifting equipment. Equipment can move or shift; can result in
death or serious injury.
•
Hazards may include, but are not limited to, folding wing movement, raised equipment movement
and shifting, etc.
Fold the implement for movements on public roads and between fields and narrow clearances. Do not use the
folded configuration for parking or storage.
OPERATION
DANGER
WARNING
UNFOLDED
FOLDED
UNFOLDED
FOLDED
