18
308.708.8185 | [email protected] | Rev. 08/21
Figure 1
LEVEL
PREPARATION & SET-UP
Front-to-Back Leveling
See “Leveling the Machine” on
. This adjustment needs to be completed in field conditions.
LEVELING THE IMPLEMENT - RIGID & FOLDING
Center Frame L/R Leveling - RIGID & FOLDING (Figure 1)
1
Hitch the Watermizer to a tractor (
).
2
Raise the implement.
3
Adjust the tractor 2-point lift arms so
that the center section tool bar is level.
Wing Leveling - FOLDING (Figure 2 & 3)
1
Remove wing lock pins from the lock position, and place in
the non-locking position before folding the wings.
2
Check wing for level at the top of the tool bar.
3
Fold implement to access Wing Leveling Bolts.
4
If wing is too high, tighten bolts in 1/4-1/2” turn
increments, unfolding machine to re-check level. If wing
is too low, loosen bolts in 1/4-1/2” turn increments,
unfolding machine to re-check level.
5
Repeat process until wing is level.
Figure 2
LEVEL
Figure 3
Wing Leveling Bolt
Wing Lock Pin
