25
308.708.8185 | [email protected] | Rev. 08/21
LEVELING THE MACHINE
OPERATION
When initially setting the Watermizer up to operate in the field the machine should be set level front to
back and level left to right. To level center and wings refer to “Leveling the Implement” section on page 18.
In order to set front to back level of machine, pull into field, then lower implement in ground. Go a short
distance while leaving the machine in the ground. Stop, put tractor into park. Then, adjust toolbar height
so that bottom of the toolbar measures between 28-31” to the ground.
Once toolbar is set to proper operating height, adjust third-link on tractor until toolbar is level.
LEVEL
30”
