WALTHER PILOT WA 650, Operating Instructions Manual

Page: 10 / 17

19 18
EC / EU Declaration of Conformity
We, the manufacturers of the equipment, hereby declare under our sole responsibility
that the product(s) described below conform to the essential safety requirements. This
declaration will be rendered invalid if any changes are made to the equipment without
prior consultation with us.
Manufacturer WALTHER Spritz- und Lackiersysteme GmbH
Kärntner Str. 18 - 30
D - 42327 Wuppertal
Tel.: +49(0)202 / 787 - 0
Fax: +49(0)202 / 787 - 2217
www.walther-pilot.de • e-mail: info@walther-pilot.de
Type Designation Automatic Spray Gun
PILOT WA 650 V 22 600
Intended purpose Processing of sprayable media
Applied Standards and Directives
EU-Mechanical Engineering Directives 2006/42/EC
2014/34/EU (ATEX Directives)
EN ISO 12100
DIN EN 1953 DIN EN 13463-1
DIN EN 1127-1 DIN EN 13463-5
Specification according 2014/34/EU
Category 2 Part marking II 2 G c T 5
Tech.File,Ref.:
2418
Authorized with the compilation of the technical file:
Nico Kowalski, WALTHER Spritz- und Lackiersysteme GmbH, Kärntner Str. 18 - 30
D- 42327 Wuppertal
Special remarks :
The named product is intended for installation in other equipment. Commissioning is
prohibited until such time as the end product has been proved to conform to the
provision of the Directives 2006/42/EC.
Wuppertal, the 14th of March 2017
Name: Torsten Bröker
Position: Manager, Design and Development
This Declaration does not give assurance of properties in the sense of product liability. The safety instructions
provided in the product documentation must be observed at all times.
Contents
Exploded Drawing 2
Declaration of CE-Conformity 19
Listing of Replacement Parts 20
1. General 22
1.1 Identification of Model Version 22
1.2 Normal Use 22
1.3 Improper Use 23
2. Technical Description 23
3. Safety Warnings 23
3.1 Safety Warting Symbols 23
3.2 Generally Applicable Safety Precautions 24
4. Assembly / Installation 24
4.1 Mounting of Spray Gun 24
4.2 Connection of Input Lines 25
5. Operational Handling 25
5.1 Starting/Stopping Requirements 25
5.2 Spray Pattern Test 25
5.3 Spray Pattern Adjustments 26
5.4 Correcting of Spray Pattern Imperfections 27
6
Retooling / Repairs
27
6.1 Replacement of Air Cap 27
6.2 Replacing the Material Nozzle 28
6.3 Replacing the Material Needle and Membrane 28
7. Cleaning 28
7.1 Safety Warnings 28
7.2 Cleaning - Complete 29
7.3 Cleaning - Routine 29
8. Trouble shooting and Corrective Action 30
9. Disposal of Cleaning / Servicing Substances 30
10. Specification Data 31
p.p.