background image

28

29

 WARNING

Precautions when using with rechargeable battery

These can run out or explode, if inappropriately handled. Please observe the fol-

lowing safety notes when handling the rechargeable battery for use with this unit:

 

Use only rechargeable batteries mentioned in these operating instructions.

 

Do not lay the rechargeable battery into fire or expose these to direct heat.

 

To prevent the product from being damaged make sure you have removed 

the rechargeable battery if you will not use the product over a longer period of 

time or if the rechargeable battery has been discharged.

 

If battery fluid has come into contact with skin or clothes, flush it off immedia

-

tely with fresh water.

 

Do not recharge the rechargeable battery unattended.

 

Once the reacharging process is finished, disconnect the charger from the 

power supply.

 WARNING

Fire danger through overheating

The device can overheat, if you operate it with covered ventilation slots. The 

device itself or easily inflammable materials in close distance could catch fire.

 

Don´t cover the ventilation slots of the device during operation. 

 

Remove easily inflammable materials. 

 

Please just use spare parts, which are conform to the required specifications.

 WARNING

Danger of burning on hot parts 

 

The illuminant may reach temperatures of up to 40 °C.

 

Don´t touch the parts during operation and cooling down. 

 

Please cool down your device before starting any mounting or maintenance 

arrangements.

 WARNING

Danger of cutting and splintering caused by bursting illuminant

Illuminants can break or splinter when banging against the floodlight. Splinters 

can cause eye and skin injuries.

 

Handle illuminants with care, to avoid breakage.

 

Make sure you do not touch the illuminant by accident when mounting or 

replacing accessories.

 WARNING

Danger of suffocation caused by small parts

Keep the device out of the reach of children and pets.

3.  Unpacking and checking the device

• Carefully unpack the package content.
•  Check whether the scope of delivery is complete.

•  Please find full scope of delivery for your device on Page 

41.

• Check whether the scope of delivery is free of damage.

 

NOTE

If the scope of delivery is incomplete or damaged, please contact: 

[email protected]

Within the scope of product improvements we reserve the right for technical and 

optical changes. Not subject to identification as per RL 2010/30/EC – Not suitable 

for illumination purposes in households. Specially developed for photo and video 

shooting requirements.

Summary of Contents for Walimex Pro Ice Sword 300 Plus























Reviews: