30
31
4. Overview of components and control elements
1 Luminous surface
2 LED bulbs
3 Lamp housing and diffusor white
4 Cap diffusor
5 Handle
6 Control panel
7 Button Plus
8 ON/OFF button
9 Button Minus
10 Status LED signal transmission
(lights up when using the remote
control)
11 Battery charging status (4 levels LED)
12 Battery charging socket (8,4 V, 2 A)
13 Cap battery charging socket
14 Cap handle/battery compartment
15 1/4 inch threaded connection
Light wand
Accessories
16 Warmlight Diffusor (orange)
17 Battery (4400 mA, 7,4 V)
18 Remote control
19 Battery charger
20 Carrying bag
1
2
3
5
8
12
13
11
19
18
16
17
WARNING
With any action you take you should pay attention to the safety notes in
the corresponding paragraphs.
6. Preparing the device for use
6.1 Assembly and disassembly of the warm light diffuser
• Unscrew the diffuser cap (4).
• Insert the orange diffuser.
• Close the diffuser cap (4) again.
• The diffuser is fully assembled.
6.2 Mounting on a lamp stand via 1/4 inch thread
As an alternative to free-hand use, you can mount the Walimex pro Ice Sword 300
Plus on a tripod/stand using the 1/4 inch thread (15) in the handle cap (14).
• Attach the light wand to the handle/battery compartment cap (14) with a 1/4
threaded connection on your stand/tripod head.
• When using a separate tripod head, the lamp can also be used tilted. During
the tilt angle adjustment, hold the LED light with one hand.
• Finally, check the secure position of the light wand again.
• The LED light is fully mounted.
5. Quick reference guide
NOTE
Detailed instructions for the following activities can be found in the relevant sec-
tions of these instructions for use. Strictly follow the sequence of the following
activities during first time use, to prevent damage to the device.
4
15
14
7
9
10
6
WARNING
Only mount the device on a stand that has been designed for the weight
and dimensions of the device.
See technical specifications.
Make sure that the tripod with the mounted device is safe against tipping over
or slipping.
NOTE
Please follow the user information issued by the stand manufacturer.
20
