Revision 1
17
Product Manual PSH-30 series Hand Wash Dryer
When the mounting bracket has been fastened to the wall, the control module, water
heater bracket and pipe work can all be connected. The most efficient time to install
the fittings will vary depending on whether the control module is being direct mounted
or remotely mounted. To see how the engine and water heater brackets are to be
affixed follow the instructions below.
Warning!
The
module must have a clearance around the air intake of 100mm
(see Fig 9) this must be left clear.
Figure 10: Minimum control module
clearance
Figure 9: Installation of control module onto
mounting bracket