Revision 1
23
Product Manual PSH-30 series Hand Wash Dryer
Figure 24: Water connections
14) Connect the water inlet hose to the water connection on the left of the unit.
Ensure that the isolator and check valve fitting is installed in the correct
orientation on the inlet hose an arrow with the direction of flow is shown on the
body of the valve.
15) When the module is securely mounted to the wall the power cables should be
connected to easily accessible switched fused spurs. The electrical installation
must be compliant to local building and electrical regulations.
Warning! All electrical work must be carried out by a qualified electrician and
should be installed in accordance with the current Nationally Approved
Regulations.
Water inlet
point
Drinking
water outlet
Water isolator
valve
