90 t / 800 t
490527A
- 72 -
1
2
3
6
4
5
7
en
Operation
Using the Stove
Ignition
The start-up process and heating is automatic.
The cooker will ignite when the heating switch (3) is pressed continuously for more
than 2 seconds. A yellow heating indicator will light, indicating that the heating is
on.
A red combustion indicator light (1) will be lit when the burner flame has been ig
-
nited and the combustion has stabilised after about five minutes after the ignition.
The whole process takes about five minutes; after the ignition phase the unit can
be adjusted.
First ignition
After the installation or maintenance the cooker may not start at the first attempt , if
the fuel line is empty.
Turn off the cooker. The cooker is shut down by pressing the heating switch (3)
continuously for more than 2 seconds. The unit won’t start immediately after the
shut-down. Wait for about five minutes until the flashing combustion light (5) has
gone off before switching the device on.
When the cooling phase is finished, switch the heater on again.
1. Combustion indicator
2. Power control / Temperature adjustment
3. Heating switch
4. Thermostat indicator (blower lid)
5. Thermostat sensor (blower lid)
6. Heating indicator
7. Power indicator
