Wallace Perimeter Security SPEEDGATE, Installation And Maintenance Manual, Page: 13 / 142

SPEEDGATE Installation and Maintenance Manual Revision 1 - MAY 2023
13
INSTALLATION AND COMMISSIONING CHECKLIST: SETTING GATE LIMITS
Installation and Commissioning Checklist: Setting Gate Limits
Complete Step Description
5.3.3-E. IF THE OPERATOR POWER IS ON YOU ARE
NOW IN PROGRAMMING MODE.
5.3.3-F. Use the foil keypad buttons (UP arrow,
DOWN arrow and STOP button), which are
located to the right of the LCD display, to
cycle through the available parameters.
5.3.3-G. Hold the UP arrow to scroll to parameter
210.
At parameter 210 use the STOP button by
pressing it once to move the underscore
to the parameter value on the right.
Scroll up and change the value to 5. This
parameter is used to set/reset the open
and closed limits.
Push stop button and HOLD to lock in the
new parameter setting. Repeat on the
other operator [bi-fold gate(s) include two
operators] and check to make sure a check
mark appears on the right-hand side of
the screen.
Once the parameter value for the set/
reset function is locked in, press the STOP
button again to return the underscore to
the parameter 210 on the left.
5.3.3-H. Follow the instructions on the LCD display, one operator at a time:
5.3.3-I. Press and HOLD STOP to begin setting the
limits.