Page 4
Installation and operation...
The ultrasonic cleaner should be mounted on a level surface. It must not be
exposed to extreme temperatures, moisture, strong vibrations, and dusty or
corrosive environments.
To operate the unit first place the appropriate fluid in the tank. This should
be selected from the list on pages 27 and 28 of this handbook.
Fill the tank to the recommended depth. This is indicated by the ridge or fill
level around the tank.
Plug the unit into a suitable socket and switch on.
After a few seconds the screen will display the serial number and the
firmware version.
Serial number
Firmware version
After 1 second a screen similar to the following is displayed
This is referred to as “The home screen” throughout this manual.
The internal clock time is displayed in the top left-hand corner of the
screen. It is in 24H clock format (hours: minutes: seconds). If this is
incorrect please follow the instructions on page 6 of this handbook.
The current fluid temperature is displayed in the top right-hand corner of
the screen in degrees centigrade.
The current timer setting is displayed in minutes and seconds in the
bottom right hand corner of the screen.
