Page 20
to change the code…
To change the code, enter it by pressing the and keys as previously
described. For example...to enter a new code of 2314 press the key
twice, the 3 times, the key once and then the key four times. The
new code you have chosen will be displayed in the top right hand. Press
the key to skip this information and NOT save the code. Or press the
to save this code.
It is important to write the code down as if it is lost the machine
must be returned to the manufacturer for reprogramming.
to change the temperature...
After the code has been correctly entered, you have 1 minute to adjust the
temperature limit as required. Pressing the key will increase the
temperature limit and pressing the key will decrease the temperature
limit.
temperature control in operation...
When the temperature is 0.95
o
C below the set limit the power is reduced
to 95% and the following message is flashed up on the screen:
If the unit is still unable to control the temperature the power is further
reduced to 90% when the fluid is 0.9
o
C below the set temperature and so
on until the unit reaches 0.5
o
C below the set temperature when the power
is reduced to 5%. Should the unit still be unable to control the
temperature and the fluid temperature reaches that of the set temperature
the following message is flashed up:
