Page 16
installing the USB driver and software on a PC...
Go to www.walkerelectronics.co.uk and visit the downloads section. In the
Driver downloads section click on the Q105 driver and program. Download
the program and run it.
Click Next on the ‘Welcome to the UltrasonUSB Setup Wizard’ screen.
Select a folder for installation (it is advised to leave it as the default) and
then click on install for ‘Everyone’ or ‘Just me’. Now on the ‘Confirm
Installation’ page click next.
The software is then installed and an Icon is added to your desktop. Click
Close to close the installer.
connect the tank…
Connect the tank with the waterproof USB lead provided.
When the tank is connected for the first time to a PC via the waterproof
USB cable, it will automatically install all device drivers and files needed.
other features of the UltrasonUSB program...
When the waterproof USB lead is connected to your PC and the ultrasonic
cleaner, you can control all of the features of the ultrasonic cleaner from
the PC just as you can from the tank.
Clicking on the start/stop, Mode, – and + icons on the screen has exactly
the same effect on the ultrasonic as it does pressing the buttons on the
ultrasonic cleaner.
In addition, you can quickly and easily set the date and time stored on the
unit. By pressing the ‘Set time’ icon on the screen the PC’s date and time
are transferred to the unit. Before proceeding with this operation please
ensure that the PC date and time are correct.
The reset default button will automatically restore the cycle time, degas
time, printer baud rate, power setting and maximum temperature control
to the factory default setting.
