Page 25
basic do’s and don'ts with the ultrasonic…
PLEASE READ THE FOLLOWING VERY CAREFULLY AS FAILURE TO
COMPLY MAY INVALIDATE YOUR GUARANTEE
1.
DO NOT use water alone in the tank when operating the unit, as a
wetting agent is required for correct transference of ultrasonic energy.
See pages 27 and 28 of this handbook for a list of suitable cleaning
agents. When using any cleaning fluid please read the directions
CAREFULLY before use. COSHH data sheets are available for all Walker
Electronics Limited fluids online at the downloads section of
www.walkerelectronics.co.uk
2.
DO NOT operate the unit without fluid in the tank.
3.
DO keep the tank free from sediment.
4.
DO NOT drop the unit or subject it to shock or impact.
5.
DO NOT immerse the unit in water or any other liquid.
6.
DO NOT use acid, bleach or any corrosive substance in the stainless-steel
tank, as they may attack the metal. DO NOT use any highly flammable
substances in the tank.
7.
DO NOT place your hands in the fluid while the unit is operating.
8.
DO NOT pour very hot or boiling water into the tank as this could cause
damage to the transducer.
9.
DO keep the lid on during use and at all other times when feasible. This
will prevent splashes and reduce aerosol production.
10.
DO NOT drop any item into the tank as this may cause damage to the
transducer. Always place the item/s gently into the tank and ALWAYS use
the basket.
