Walinga Airlock 1008, Operator'S Manual

Page: 79 / 126

OPERATOR’S MANUAL
c. Clean or replace the seal as required.
d. Visually inspect the end plate-seal plate seals, looking for any nicks, tears,
abraded areas, excessive wear, or accumulation of dirt, dust or debris.
Figure 7-25: Inner seal plate seal
e. Clean or replace the seals as required.
f. Loosen and remove the lock nut, set screw, and bearing cone and cup as
required.
g. Visually inspect the inner rotor shaft seals, looking for any nicks, tears, abraded
areas, excessive wear, signs of thermal degradation, or accumulation of dirt, dust
or debris.
Figure 7-26: Standard style inner shaft seal Figure 7-27: Abrasive style inner shaft seals
MAINTENANCE AND ADJUSTMENTS 00-144477-0 A 7-25