Multi Mode – Instrument settings
39
Waldorf Q User’s Manual
1. Hold down the
Multimode
button and choose the desired instrument with the red dial while
being in Multimode.
When the Play page is selected, the display shows the Instrument number in the top left corner as
follows:
Inst:4 Multi:001
Sequencer Multi
The instruments are numbered reasonably from
1
to
16
. In the display shown above Instrument 4 is
selected. If you want to select Instrument 12, for instance, you have to access Bank 3 by pressing
Shift + Inst.3
and then button
Inst.4
to switch to Instrument 12.
When one of the Instrument parameter pages is selected, the current Instrument number is shown in
the top right corner as follows:
Channel |Output 4
global |Main Out
���
Don’t confuse Instruments with MIDI Channels. Although you can set up a Multi that uses
separate MIDI Channels in ascending order for all Instruments, it can also be that a couple or
all Instruments are set to the same MIDI Channel. Please read the description below to see how
the MIDI Channel for a particular Instrument is set.
☞
To call the Multi parameter pages:
1.
Make sure that the
Multimode
LED is lit to indicate that the Multi mode is active.
2.
Press
Multi
. The display changes to the
Multi
or
Instrument
parameter page that was
active before you left the Multi parameter pages the last time.
Instrument settings
The instrument parameters specify the individual settings of each instrument in a Multi Program. You
can edit the audio output, transpose function or tuning, key range and velocity range for a selected
sound.
Additionally the Multimode offers various settings for Midi functions. This allows the Q
Keyboard to be used as the perfect Masterkeyboard. In the appendix of this manual on page 160 you
will find a graphical overview of the Q’s Midi Signalflow.
Sound Bank and Number
A…D 001…100
Each Instrument points to one Sound in memory. The display shows the Sound name in the upper row
and the Sound bank and number in the lower row as follows:
Zeitlos T 1
Bank: A Sound: A001
☞
To select a Sound for an Instrument:
•
Use the
left display dial
to select
Bank A…D
from which the Sound program is taken.
•
Use the
right display dial
to select the Instrument’s Sound program
001…100
.
���
In a Multi-Program you can use only one Drum Map at a time. When you’re assigning a Drum
Map to an instrument, any other instrument using a Drum Map will be restored to the normal
program assignment.
Summary of Contents for Q Rack
Page 1: ...User s Manual Q Keyboard Q Rack ...
Page 170: ...Appendix MIDI Implementation Chart Waldorf Q User s Manual 170 ...
Page 172: ......
Page 173: ......
