Sound Parameters – Effects
Waldorf Q User’s Manual
108
LFE LP !Input HP
082.4 Hz |110.0 Hz
LFE LP
10.9Hz...16.7kHz
Determines the crossover frequency below which the effect signal is routed to the LFE channel output
(Sub Out 2 R). If you want to make a typical „5.1 mix“ a setting of
80 Hz
is recommended.
Input HP
10.9Hz...16.7kHz
Determines the highpass crossover frequency for all effect signals except for the LFE. The
Input HP
is
used to adjust the bass frequencies for all channels independently from the LFE channel.
FSL V. !Delay ML
127 | 100.0 %
FSL Volume
0...127
Determines the volume of the effect signal for the left Front Speaker (Main Out L).
Delay ML
0%...400%
Determines the relative delay of the effect signal pertaining to
the setting of the
Delay
parameter.
FSR V. !Delay MR
127 | 100.0 %
FSR Volume
0...127
Determines the volume of the effect signal for the right Front Speaker (Main Out R).
Delay MR
0%...400%
Determines the relative delay of the effect signal pertaining to
the setting of the
Delay
parameter.
CntrS V. !Delay S2L
127 | 100.0 %
CntrS Volume
0...127
Determines the volume of the effect signal for the Center Speaker (Sub Out 2 L).
Delay S2L
0%...400%
Determines the relative delay of the effect signal pertaining to
the setting of the
Delay
parameter.
RearSL V.!Delay S1L
127 | 100.0 %
Rear SL Volume
0...127
Determines the volume of the effect signal for the left Rear Speaker (Sub Out 1 L).
Delay S1L
0%...400%
Determines the relative delay of the effect signal pertaining to
the setting of the
Delay
parameter.
Summary of Contents for Q Rack
Page 1: ...User s Manual Q Keyboard Q Rack ...
Page 170: ...Appendix MIDI Implementation Chart Waldorf Q User s Manual 170 ...
Page 172: ......
Page 173: ......
