Waldorf Q Rack, User Manual

Page: 100 / 174

Sound Parameters – Effects
Waldorf Q User’s Manual 100
Speed | Depth
064 | 064
Speed
0…127
Sets the LFO speed of the Flanger effect.
Depth 0…127
Sets the modulation depth of the Flanger effect.
Feedback |Polarity
064 |positive
Feedback
0…127
Controls the feedback amount of the Flanger signal.
Polarity positive / negative
Determines if the feedback signal is fed back into the Flanger as it is or if it is inverted beforehand.
Phaser
A Phaser is a combination of several "allpass" filters working in parallel. This generates an effect with
equally spaced frequency peaks or holes. The result is a strongly colorized signal with a “spacey”
character.
���
A Mix setting of 48 to 96 produces the strongest effect because both the unaffected signal and
the processed signal are mixed together.
Speed | Depth
064 | 064
Speed 0…127
Sets the LFO speed of the Phaser effect.
Depth
0…127
Sets the modulation depth of the Phaser effect.
Center | Spacing
064 | 064
Center 0…127
Controls the basic delay length of the allpass filters. Lower settings produce a high pitched Phaser
effect while higher settings enable the Phaser to also cover deep frequencies.