22
Mounting
ENG
3. Mounting
CAUTION
Risk of injury caused by a falling or
tilting luminaire.
Personal injury and material damage.
X
Use only the delivered fastening
elements or other suitable fasten-
ing elements available from the
manufacturer.
X
Mount the fastening elements and
luminaire correctly.
3.1 Connection possibilities
Depending on the connection, the luminaire
is mounted in different ways.
There are the following connection pos-
sibilities:
Standing base, see chapter 3.2
“Mounting a luminaire on a standing
Table clamp, see chapter 3.3 “Mounting
a luminaire on a table clamp”, page 23
Adaptor, see chapter 3.4 “Mounting a
luminaire on an adaptor”, page 23
3.2 Mounting a luminaire on a
standing base
Fig. 1: Standing base models.
X
Place the standing base on an even
surface.
A
B
C
Fig. 2: Mounting a luminaire on a stand-
ing base.
X
Insert the stud
A
on the luminaire col-
umn into the opening
C
of the standing
base, see Fig. 2.
X
To secure the column, insert the
screw
B
into the thread of the base and
tighten it, until it is flush with the end
of the thread.
X
Align the luminaire and standing base
in the same direction.