![background image](http://html1.mh-extra.com/html/kovea/kl-2905/kl-2905_instruction-manual_1999487001.webp)
HELIOS GAS LANTERN
It`s a real experience
Instruction Manual
- Be Extra Caution of Keep Away from Children -
It is very dangerous when operate or touch by children.
Read through all the instruction manuals before use and store
the instruction in place where easy to find
Limited Warranty
This KOVEA stove has one year limited warranty. If this product falls to work during
the one year period, return it to our authorized repair facilities.
We will repair or replace ot at our option. Repairs required due to improper use or
care, negligence, product modification, or accident are not covered under this warranty
agreement, but will be performed at a nominal charge upon request.
This warranty applies only to the original purchaser. Proof of purchase may be required.
Products purchased from an independent dealer should be returned to this dealer.
This warranty gives you specific legal rights. You may also have other rights which vary
from countries. Some countries do not allow the exclusion or limitation of incidental
or consequential damages, or limitations or exclusions of implied warranties, so the
above exclusion and limitation may not apply to you.
WARNING
● Only use in well ventilated areas.
● Do not move or leave it unattended white in use.
● Keep away from children.
● Do not operate near flammable materials.
KOVEA Co., Ltd.
4F, Bucheon Technopark 202 # 388, Songnae-daero,
Wonmi-gu, Bucheon-City, Gyeonggi-do, Korea
+82 32 621 2170 (Ext. 143)
www.kovea.com
1299-11
Name of Each Part & Characteristic
Lid
Globe Protector Wire
Reflecting Shade
Mantle
Gas Flowing Tube
Adjusting Knob
Valve
One Touch Piezo ignition
Lantern Chain String
Reflecting Shade
Focus the light downward.
– Lid: Strong corrosion resistant ceramic coating lid.
– Globe Fix Plate: Prevents Globe Deviation.
– Handle: Convenient for carrying and hanging of the product
– One Touch Piezo System: One touch Piezo ignition.
– Reflecting Shade: Provides better light efficiency.
●
Setting Mantle
(Below Mantle settings methods apply to model KL-2905, TKL-4319, KL-103, KL-K805,
TKL-N894, TKL-929)
1. Open up the Lid and take out the Globe.
2. Prepare Mantle & Lighter
.
Green
Red
3. Green part of mantle on the top and red part
of mantle face down to set. (The Mantle sets
on the place where arrows indicates on the
picture).
Green
Red
4. After setting Mantle, fire on the
mantle until gets white. (Smokes
may appears).
5. Do not touch or remove the white ash state
mantle after burning of mantle as picture
shown.
6. Put back the Globe and Lid to
reignite or use.
Be caution of mantle damages from impacts.
The Mantle is not one time disposable, it can be use as semi-permanent but any damage
replace with new Mantle.
Specification
ITEM NO: Helios Gas Lantern
Model No: KL-2905
Size: 108 X104 X 167mm (Inner Box)
Weight: 248.5g
Ignition: Auto
ignition
Usable Gas: Butane Propane (230g/450g)
Brightness: 90LUX
Gas Consumption: 51 g/h
Usage
●
Connecting & Disconnecting gas canister
Please check damages of rubber ring on the valve
before connecting gas canister. (T
urn Adjusting-Knob
to clockwise completely)
Connect product valve and screw hole of gas
canister vertically accurate and then turn gas canister
clockwise to install.
After connecting, please check any gas leakages.
After usage, please disconnect the gas canister
after cool down of the product. For disconnecting,
please follow reverse direction of the connection or
installation of the gas canister.
●
Ignition
After connecting gas canister, turn
Adjusting-Knob
slowly to anticlockwise at the same time press One
Touch Piezo igniter for ignition. Do not get near your
face to the product during ignition.
After ignition is complete, adjust light for your use.
●
Extinguishment
Turn
Adjusting-Knob slowly to clockwise until the light
is completely off. At this point do not touch globe and
around lid area until the product gets cool down and
keep separate the product with the gas canister for
storage and carry.
●
Lid Usage
By separating the lid, pull up the Globe Protector Wire
towards to outside as picture showing on the left. To
fix the lid follow the opposite direction of separating
the lid until “tick” sounds appears when inserting.
●
Reflecting Shade Usage
By using Reflecting Shade, set up the Reflecting
Shade as picture showing on the left which concave
part is facing down and inserts on the top of the
lantern lid.
The Reflecting Shade is very hot during in use or right
after use so do not touch with bare hands. It may
causes risk of fire burns.