1025-001011-998 RV-A
MHB Series LED Highbay
ACCESSORY INSTRUCTIONS
IMPORTANT:
Read all instructions carefully before attempting
installation.
If you do not understand these instructions, please
consult your local distributor.
Thoroughly inspect the fixture for any freight damage;
freight damage should be reported to the delivery
carrier.
WARNING:
Disconnect power during installation and before
servicing.
Wear gloves to prevent cuts/abrasions from sharp
edges when removing from carton, handling, and
maintaining this fixture.
SAFETY:
This fixture must be wired in accordance with the National
Electric Code and applicable local codes or ordinances.
All work should be performed by a qualified electrician.
To insure personal safety, proper grounding is required
(connect green fixture lead to supply ground).
WARNING:
The LED Panels are not repairable. DO NOT use damaged or
defective LED Panels. DO NOT touch LED chip surface with bare
hand. DO NOT touch, attach, or detach LED Panels in a live
system.
FACTORY INSTALLED LENS ACCESSORY
:
When ordered with Factory installed lens, MHB Series High Bay
luminaries are designed for easy lens access with no tools
required.
Depress quick release button on each end to allow Lens
Assembly to pivot open, OR
Pull back on button tabs on each end to allow Lens Assembly to
pivot open as shown for easy lens access for cleaning or
maintenance.
Following fixture maintenance, pivot lens assembly back into
position and press buttons to snap back to closed position.
CORD ACCESSORY
:
MHB Series High Bay luminaries ordered with Power Cord option are designed for easy cord installation.
When ordered with cord option, the fixture is supplied with the power cord preassembled onto Access Plate.
Locate Disconnect Plug (Male) in
Access opening.
Connect Plug (Female) from
preassembled cord.
Install Access Plate onto fixture and
secure with supplied screw.
