ATTENTION: Install in accordance with national and local building and electrical codes
.
!
Page 1
Mount Spacing
MicroSquare gen 2 fixture modules are designed for exact on-grid
mounting with mounts attached to the joiner assemblies.
MicroSquare gen 2 Endcap Kit(s)
•
Endcap
•
Joiner bracket
•
2x joiner aligners
System Overview
These instructions review how to install MicroSquare gen 2 suspended fixtures. MicroSquare 4ft, 6ft and 8ft
modules can be installed as individual standalone units, or they can be joined together to create continuous
runs. The graphics below show the components required to install a typical run of MicroSquare gen 2 sus-
pended fixtures.
IMPORTANT: Read all instructions before beginning installation.
Module Lengths
MicroSquare suspended fixtures come in 4ft, 6ft and 8ft modules.
Overall module lengths are shown below.
Add 2.2” for each
endcap for accurate run length.
48”
72”
96”
4FT Module
6FT Module
8FT Module
Tools
Required:
•
Philips screwdriver
MicroSquare gen 2 Joint Kit(s)
•
Joiner bracket
•
2x joiner aligner
