WAGO 750 Series Manual Download Page 61

Page: 61 / 248

Board Support Package (BSP)

•

Scope of delivery

WAGO-I/O-SYSTEM 750

Linux Fieldbus Coupler

The

/linux

directory

This directory contains the 2.6 Linux source code as well as the ARM
toolchain for x86 systems

•

sources

The source code for the 2.6 Linux kernel.
The source code is unpacked by the

install.sh

script into the home

directory of the current user.

•

toolchain

ARM toolchain for x86 systems.
The

install.sh

script requires super user privileges.

The

/uboot

directory

This directory contains the source code as well as the toolchain of the boot
loader (uboot) for x86 systems.

Changes to the boot loader should only be made in some rare exeptions.

•

sources

The uboot source code.
The source code is unpacked by the

install.sh

script into the home

directory of the current user.

•

toolchain

Uboot toolchain.

The

install.sh

script requires super user privileges.

Summary of Contents for 750 Series

























































































































































































































































Search results

Summary of Contents for 750 Series

Reviews:

Related manuals for 750 Series

Brands by name

Popular brands

WAGO 750 Series, Manual

Search results

Summary of Contents for 750 Series

Reviews:

Related manuals for 750 Series

Brands by name

Popular brands