WAGO 750 Series Manual Download Page 112

Page: 112 / 248

108

•

Step-by-Step Guide to your own Linux Application

Running the new Program

WAGO-I/O-SYSTEM

750

Linux Fieldbus Coupler

The Konqueror is another FTP client. Start the program and change to the

/targetfs

root directory. Start another instance of the program instance and

change to the target directory of the Linux fieldbus coupler using

ftp://<IP

address>/bin

. Now you can drag and drop files between the directories.

5.8 Running the new Program

The new program can be executed on the Linux coupler via the console, e.g.
via the terminal (see chapter 4.3).

> chmod +x /bin/newProg

In any directory you can run the command

> newProg

HelloWorld!

5.9 Automatic start of new Programs (inittab/startwago)

During the startup of the operating system, Linux starts the processes that can
be found in the

inittab

file during boot-up: in our system,

inittab

looks as

follows:

::sysinit:/etc/rc

::sysinit:/etc/startwago

::respawn:/etc/getty -L ttyS0 38400

In this file, the

startwago

file with the attribute

sysinit

is run, among others.

This means, the

startwago

script is started once during the system start-up.

The getty program which also supports the serial interface is started as a
respawn process. This process is thus restarted automatically if it is
terminated. The attributes are:

•

sysinit
Is started once during system start-up.

•

bootwait
Is started once after all sysinit processes.

•

respawn
Is restarted automatically if the process was terminated.

Please refer to the initab manpage for more attributes.

Summary of Contents for 750 Series

























































































































































































































































Search results

Summary of Contents for 750 Series

Reviews:

Related manuals for 750 Series

Brands by name

Popular brands

WAGO 750 Series, Manual

Search results

Summary of Contents for 750 Series

Reviews:

Related manuals for 750 Series

Brands by name

Popular brands